Wall Mount Solution

best canada wallmount solutions

Skip to Main Content »

Your shopping cart is empty

Installation Services

MH19MH18MH4-1MH4-2MH5MH8MH20MH21MH11MH22MH16-1MH16-2MH15-1MH15-2MH17-1MH-17-2CB1CB2CB3CB4CB11CB12CB13CB14CB16CF1CW9DM2DM3DM10CW7CWMH9CW10MH3-1MH3-2MH3-3MH12MH14
55" Samsung 4K TV installed over fireplace. Denon DHT-S514 sound bar installed directly below the TV. Components are hidden inside the niche behind the TV and controlled by Harmony Ultimate Home remote.
TV wall mount on the wall with a single component shelf installed directly below the TV to place a cable box. Electrical outlet and cable jack installed behind the TV to hide all wires.
TV wall mounted. Power outlet installed behind the TV. Low-voltage cables concealed in-wall vertically down. Component stand placed directly below the TV to facilitate components and Bose 2.1ch sound system.
Example of in-wall Vertical wire concealment.
TV mounted on the wall. Low-voltage cables fished vertically down the wall. Bridge-Style Power kit installed. Component stand placed directly underneath the TV with components hidden away inside the cabinet behind closed doors.
TV wall mounted above a fireplace. Electrical outlet installed behind the TV. Low-voltage cables fished through the wall from behind the TV, down to the Unfinished basement and then fished back up to the wall next to the fireplace behind the closed cabinet doors.
55" TV mounted over fireplace. Denon sound bar installed to the TV using sound bar brackets. HDMI cable was pre-wired during construction from fireplace to the cabinet on the left wall. Harmony Ultimate remote used to control components hidden away inside the cabinet.
46" TV mounted over fireplace. Denon sound bar attached to the TV using sound bar brackets.
Samsung 65" Curved TV wall mounted over fireplace. Sound bar attached to the TV using Sound bar brackets. Electrical outlet installed behind the TV to power the TV and sound bar. Low-voltage cables fished from behind the TV down to the basement and then fished back up to the side of the fireplace where the components are placed.
55" TV mounted on the wall. Bose sound bar attached to the TV using sound bar brackets. Electrical outlet installed behind the TV. Cables fished through the wall. Components sitting on a cabinet below
TV wall mounted over fireplace. Electrical outlet installed behind the TV. Low-voltage wires fished down through unfinished basement then fished back up to the corner of the wall where the components are placed on a component tower / stand. 5.1ch surround sound home theater system installed and satellite speakers mounted on the wall.
Custom AV wall plates installed for the home theater system. 5.1ch sound distribution Banana plug binding post wall plate & 2 port HDMI wall plate. They are installed right behind the component tower / stand.
TV mounted on the wall. Electrical outlet installed behind the TV. Low-voltage cables fished down through the wall. 5.1ch surround sound system installed with 3 x front channel In-wall speakers & 2 x rear channel in-ceiling speakers.
Components setup on a temporary book shelf below the TV for now until the customer buys a proper component stand.
TV wall mounted. Component stand directly below the TV. Bridge-style power kit installed behind the TV. Low voltage cables fished directly down from behind the TV. 5.1ch Bose surround sound system installed. Satellite speakers wall mounted and speaker wires fished through the wall.
5.1ch Bose surround sound system.
50" TV mounted on drywall & metal studs. Electrical outlet installed behind the TV. HDMI cable fished down through the wall and connected to a computer behind the wall hidden inside a cabinet.
70" TV installed on drywall & metal studs. Power outlet installed behind the TV. Wireless HDMI receiver connected to the TV and hidden behind. Wireless HDMI transmitter is connected to a laptop to control from the boardroom table.
60" TV mounted on drywall and metal studs. Power outlet installed behind the TV. "LifeSize" video conference unit is installed with the TV. Camera is mounted above the TV. And head unit is resting on top of a component shelf mounted below the TV. Cat5e cable is fished down through the wall and connected to the control unit sitting on the boardroom table.
47" TV mounted on custom built wall. Power outlet installed behind the TV. HDMI cable fished through the wall to a PC located behind the wall.
4 x 47" monitors installed side by side during pre-contruction to be used as Digital Signage for this shop.
3 x 47" monitor Digital Signage installation during construction phase.
2 x 46" commercial display monitors installed with touch-screen overlay.
55" TV installed in a lobby of an office. Electrical outlet was already installed up high on the wall behind the TV.
55" TV installed completely flush as the surface of the custom-built wall.
50" TV mounted on concrete wall in condo. DVD shelf mounted below the TV and an electrical fireplace below. Components are sitting on top of the DVD shelf and sort of camouflaged by the black paint on the wall.
TV wall mounted on drywall & metal studs. Low-voltage cables vertically fished down through the wall. Bridge-style power kit installed to supply power to the TV. Sound bar is resting on the component stand.
TV wall mounted on drywall & metal studs. Low-voltage cables vertically fished down through the wall. Electrical outlet installed behind the TV. Bose sound bar & Apple TV sitting on top of a stand below.
50" Plasma TV wall mounted on drywall & metal studs. Bridge-style power kit installed and low voltage cables fished down the wall. 5.1ch surround system installed. 3 front channel speakers mounted on the wall with wires fished down the wall.
50" TV wall mounted on concrete wall. Components sitting on top of the wardrobe cabinet below the TV. Wires neatly managed with wire raceway and then painted as the same color of the wall.
60" TV wall mounted on concrete wall with an Articulating bracket to allow swivel left & right. Sound bar mounted to the top of the TV using sound bar brackets. 2 tier component wall shelf mounted directly below the TV to place components.
TV wall mounted over fireplace. Sound bar resting on top of the fireplace mantle. Component stand is placed right next to the fireplace to facilitate components. Wire raceways used to conceal wires on-wall.
TV mounted on concrete wall. 2 tier component wall shelf mounted directly below the TV for cable box and bluray player. Wires neatly managed with Wire-Raceways.
TV wall mounted and Bose sound bar mounted to the TV using Sound Bar Brackets. Bridge-style power kit outlet installed behind the TV to power the TV and the sound bar. HDMI cables fished through the wall vertically down and 4 Port Custom HDMI wall plate installed next to an electrical outlet. Bridge-style power kit inlet is installed next to the coaxial cable jack. Component stand will be placed below the TV to facilitate components.
Closer look of the HDMI wall plate and Bridge-style power kit inlet.
Wiring behind the TV
60" Sharp TV mounted over fireplace. Sound bar resting on top of the fireplace mantle. Wire raceways were used to conceal the cables on-wall and running around the contour of the fireplace to the right side where the component stand is to facilitate the components.
37" TV installed on the wall. Power outlet installed behind the TV and low voltage cables fished vertically down the wall. Component stand placed below the TV to house components. 2 x In-wall speakers installed next to the TV.
 
  • Follow WMS
  •  

Starting from $120 TV Wall Mount Installation Services

Our installers with many years of experience will wall mount your flat or curved screen TV to your wall securely and safely.
Serving Toronto, North York, Mississauga, Brampton, Richmond Hill, Markham, Scarborough, Vaughan, Ajax, King city, Bolton, Nobleton, Aurora. We service both residential and business. Ask us about special promotion on wall mount brackets! Wire concealment is extra.

*** Don't be fooled by other websites that post pictures of Stock Photos downloaded from the internet! ***


We show actual photos of our quality work unlike some of the competitors & we have transparent pricing information listed on our website. We pay attention to the smallest little details that results in Neat & Clean Professional installation which distinguishes us from the rest of the competition. We do things the Right-Way, such as proper wiring which meets or exceeds building-codes.

Choose Wall Mount Solution with Confidence!

Find Out General Pricing Information by Choosing a Category Below

What you should know - There are different types of walls depending on the type & age of your dwelling. In newer houses & townhouses, you will find drywall & wooden studs. In older houses & buildings, you will most likely find plaster interior & exterior walls unless it's been renovated including the walls. In condos, Lofts, Apartments & most of condo-townhomes, there are usually drywall with metal studs or concrete walls. Some of these walls have limitation on certain aspects of the installation. For example, on drywall & metal studs (in condos, apartments, loft & some condo-townhome), articulating brackets are not suitable for heavier TVs. And installation on concrete walls, you cannot fish wires through the wall. Nonetheless, we can guide you how to best approach your AV installation with our creativity that accumulated over many years of experience. 

Services we provide: Home theater / Sound bar installation, Projector & screen installation, Digital signage installation, home networking, pre-wiring cables, install new cable jacks, Cat5e / Cat6 jacks & etc... We carry extensive line of TV wall mount brackets, HDMI & other AV cables, connectors / adapters, AV wall plates, Harmony remote controls & other AV accessories to complete your project. 

For Home Theater installation / Projector installation / Digital Signage installation / complex / custom installations / custom wiring (e.g. running wires horizontally across the room or room to room, etc..) , On-Site Assessment is highly recommended.

Service Coverage Area & Hours of Operation

 Service Most of Toronto GTA Area

What is Our Service Coverage Area?


We service in following cities - Toronto, North York, Etobicoke, Mississauga, Brampton, Richmond Hill, Markham, Scarborough, Vaughan, Stouffville, New Market, Woodbridge, Agincourt, Bramalea, East York, Pickering, Ajax, King City, Bolton, Nobleton, Aurora. We service both residential & business.

Request FREE Quote!

Hours of Operation:
10am to 8pm Monday through Saturday
(Excluding Holidays)

2 Item(s)

per page

Set Descending Direction
  1. Non-Refundable Deposit for Booking Installation Service

    Non-Refundable Deposit for Booking Installation Service

    Regular Price: $50.00

    Product ID: 1120

    This Non-Refundable deposit will be FULLY credited towards the installation service. Please read Description.

    Learn More
  2. On-Site Assessment / Consultation

    On-Site Assessment / Consultation

    Regular Price: $100.00

    Product ID: 1079

    We will visit the site to assess and provide accurate quotation for custom or complex audio / video installations. Once customer decides to go ahead with the installation, 50% of On-Site Assessment / Consultation fee will be credited towards the installation services.

    Please note: Minimum service fee (labour portion) must meet or exceed $250 before tax for the credit to be applicable towards the service fee.

    Learn More

2 Item(s)

per page

Set Descending Direction