Rotary Type Speaker Volume Control Wall Plate 100 Watts RMS

Special Price CAD $49.99 was CAD $79.99
In stock
PRODUCT ID
1171

This is a rotary-type wall plate volume control for speaker systems with power ratings of up to 100 watts per channel and impedance ratings of 4 to 8 ohms. This rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.

The wall plate mounts into a standard single-gang, low-voltage wall bracket (not included) and has inputs and outputs for one pair of stereo speaker wires (4 input connections and 4 output connections). It can accept speaker wire in sizes from 14 to 16 gauge and provides a frequency response range of 35 Hz to 20 kHz (+0/-2db) at the full power rating of 100 watts per channel.

Input 2 channels, 100 watts per channel
Output 2 channels, 4 to 16 ohms impedance matching
Frequency Response 35 Hz to 20 kHz (+0/-2 db) at rated power
Wire gauge 14 to 16 AWG
Material Plastic ABS
Depth 2 3/4"
 
When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier. This is done by setting the jumpers on the volume control to compensate for the number of speakers you have in a parallel configuration and the impedance level of the speakers.
 
If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes - just leave the jumper in the default x1 position. However, if your speakers are of a different impedance level and/or you have more than one set of speakers in parallel, please refer to the following chart as a guide for setting the jumpers on the speaker volume control.
 
Impedance Correction Chart
Speaker
Impedance
Amplifier
Rating
Jumper Setting /
# of Speaker Pairs
x1x2x4x8
4 ohm speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs
4 ohms 1 pair 2 pairs 4 pairs 8 pairs
8 ohms n/a 1 pair 2 pairs 4 pairs
8 ohm speakers 2 ohms 4 pairs 8 pairs 16 pairs 32 pairs
4 ohms 2 pairs 4 pairs 8 pairs 16 pairs
8 ohms 1 pair 2 pairs 4 pairs 8 pair
16 ohm speakers 2 ohms 8 pairs 16 pairs 32 pairs 64 pairs
4 ohms 4 pairs 8 pairs 16 pairs 32 pairs
8 ohms 2 pairs 4 pairs 8 pair 16 pairs
Write Your Own Review
You're reviewing:Rotary Type Speaker Volume Control Wall Plate 100 Watts RMS
Your Rating

We found other products you might like!